Shield Pressure Reducing Landing Valve
Landing Valves

Shield Pressure Reducing Landing Valve

Shield·SKU: SHIELD-F-6979

SHIELD pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurized supply. These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar -12 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 ba

Request a quote

Description

SHIELD pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurized supply.

These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar -12 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 ba

Features

  • BSI Kitemark approved.
  • Body material made of copper alloy to EN 1982.
  • Hand wheel material made of grey cast iron to BS EN 1561.
  • Blank cap material made of copper alloy to EN 1982.
  • Possible to replace the gland seal when under pressure with the valve fully closed.
  • Disc facing rubber are of replaceable type.
  • Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
  • The hand is painted black and the body is painted red.

Specifications

SD-PRLVF
SPECIFICATIONS
MODEL NUMBER SD-PRLVF-50 SD-PRLVF-65
VALVE TYPE Oblique, Pressure Reducing, Flanged Inlet
PRESSURE RATING High Pressure Valve
NOMINAL SIZE DN50 DN65
WORKING PRESSURE 20 Bar Maximum
TEST PRESSURE Valve Seat Test at 22 Bar • Body Test at 30 Bar
FLANGE DRILLING BS4504 Part : 2 : 1974 Table : 16/21
MIN. WATER FLOW RATE 8.5 L/S @ 4 Bar Outlet Pressure
MIN. VALVE PRESSURE REGULATING 4-12 Bar
BILL OF MATERIAL
SL. NO. DESCRIPTION MATERIAL
1 Handwheel Grey Cast Iron to BS EN 1561
2 Stem Copper Alloy to BS EN 12164
3 Bonnet Copper Alloy to EN 1982
4 Body Copper Alloy to EN 1982
5 Female Inst. Outlet Copper Alloy to EN 1982
6 Blank Cap Copper Alloy to EN 1982
7 Renewable Disk Facing Rubber to BS 1154
8 Washer Rubber to BS 1154
9 Gland Seal Rubber to BS 1154
10 Bonnet Seal Teflon
11 Gland Copper Alloy to EN 1982
12 Strap with Pad Lock Strap-Leather (12mm Wide, 2mm Thick) LOCK-Non-Ferrous

Catalogue family reference SHIELD-F-6979 identifies this manufacturer product page; it is not an orderable manufacturer SKU. Confirm the required model and configuration when requesting information.

Official manufacturer product information

Technical Specifications

1DESCRIPTION: Handwheel; MATERIAL: Grey Cast Iron to BS EN 1561
10DESCRIPTION: Bonnet Seal; MATERIAL: Teflon
11DESCRIPTION: Gland; MATERIAL: Copper Alloy to EN 1982
12DESCRIPTION: Strap with Pad Lock; MATERIAL: Strap-Leather (12mm Wide, 2mm Thick) LOCK-Non-Ferrous
2DESCRIPTION: Stem; MATERIAL: Copper Alloy to BS EN 12164
3DESCRIPTION: Bonnet; MATERIAL: Copper Alloy to EN 1982
4DESCRIPTION: Body; MATERIAL: Copper Alloy to EN 1982
5DESCRIPTION: Female Inst. Outlet; MATERIAL: Copper Alloy to EN 1982
6DESCRIPTION: Blank Cap; MATERIAL: Copper Alloy to EN 1982
7DESCRIPTION: Renewable Disk Facing; MATERIAL: Rubber to BS 1154
8DESCRIPTION: Washer; MATERIAL: Rubber to BS 1154
9DESCRIPTION: Gland Seal; MATERIAL: Rubber to BS 1154
Catalogue family referenceSHIELD-F-6979
Published construction statement 1Body material made of copper alloy to EN 1982.
Published construction statement 2Hand wheel material made of grey cast iron to BS EN 1561.
Published construction statement 3Blank cap material made of copper alloy to EN 1982.
Published pressure statement 1These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar -12 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 ba

Documents & Technical Downloads