Shield Oblique Landing Valve (Male Threaded Inlet)
Landing Valves

Shield Oblique Landing Valve (Male Threaded Inlet)

Shield·SKU: SHIELD-F-6978

SHIELD landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply. The landing valves are oblique type with threaded inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.

Request a quote

Description

SHIELD landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply.

The landing valves are oblique type with threaded inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.

The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.

Features

  • BSI Kitemark approved.
  • Body material made of copper alloy to EN 1982
  • Hand wheel material made of grey cast iron to BS EN 1561.
  • Blank cap material made of copper alloy to EN 1982.
  • Possible to replace the gland seal when under pressure with the valve fully closed.
  • Disc facing rubber are of replaceable type.
  • Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
  • The hand wheel is BLACK painted and body to RED.

Specifications

SD LVT-65

 

Catalogue family reference SHIELD-F-6978 identifies this manufacturer product page; it is not an orderable manufacturer SKU. Confirm the required model and configuration when requesting information.

Official manufacturer product information

Technical Specifications

Catalogue family referenceSHIELD-F-6978
Published construction statement 1Body material made of copper alloy to EN 1982
Published construction statement 2Hand wheel material made of grey cast iron to BS EN 1561.
Published construction statement 3Blank cap material made of copper alloy to EN 1982.
Published pressure statement 1The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.

Documents & Technical Downloads