
Shield Pre-Piped Bladder Tank
The SHIELD Pre-piped Horizontal / Vertical Bladder tanks are an integral component of balanced pressure proportioning system. Its operation requires no external power other than a pressurized water system. SHIELD bladder tank, with an appropriate proportioner, injects foam concentrate into the water supply of a fire protection system and automatically proportions at wide range of flows and pressures. SHIELD Pre-piped Foam Horizontal / Vertical bladder tank is a steel pressure vessel fitted with
Request a quoteDescription
The SHIELD Pre-piped Horizontal / Vertical Bladder tanks are an integral component of balanced pressure proportioning system. Its operation requires no external power other than a pressurized water system.
SHIELD bladder tank, with an appropriate proportioner, injects foam concentrate into the water supply of a fire protection system and automatically proportions at wide range of flows and pressures.
SHIELD Pre-piped Foam Horizontal / Vertical bladder tank is a steel pressure vessel fitted with an Internal Elastomeric bladder that stores foam concentrate. During operation, the concentrate is discharged by incoming water pressure to the bladder tank until the concentrate is depleted.
The bladder tank discharges foam concentrate at approximately the same pressure as the water supplied at the water inlet connection to the tank.
Features
- UL LISTED/FM APPROVED/ASME ‘U’ STAMP/NBBI ‘R’ STAMP
- UL / FM Pre-Piped Bladder tank capacity 36 gallon to 6000 gallon.
- Bladder material Vinyl Based Polymer or Buna-N or Neoprene.
- Designed for Maximum agent discharge.
- Pre-fabricated foam bladder proportioning system eliminates loose components and simplifies the installation.
- Tanks are oversized to allow thermal expansion of foam concentrate if any.
Specifications
| Concentrate Storage Capacity | 36-3200 Gallon – Vertical
50-6000 Gallon – Horizontal |
| Ratio Controller
(Type, Size & Flow Range) |
Refer to the Ratio Controller
datasheet |
| Foam Concentrate | Refer to the Ratio Controller
Detail table below |
| Design Pressure | 175 psi (12.09 bar) |
| Storage Temperature | +1.7°C – +49°C |
| Foam Concentrate Proportioning Orifice | 1%, 2%, 3%, 6% |
| Tank Shell | Carbon Steel, SA 516 Gr.70. |
| Bladder | Vinyl based polymer or Buna-N or Neoprene |
| Water Pipe | Carbon Steel. sch. 40. |
| Foam Pipes | Stainless Steel 316L |
| Vent/Drain/NRV Valves | Brass/Bronze. |
| Sight Glass Valve | Sight Gauge with Shut Off & Drain Valve |
| Painting External | Zinc Rich Primer with Red Enamel Finish |
| Painting Internal | Zinc Rich Primer with Coal Tar Epoxy Paint |
Catalogue family reference SHIELD-F-7953 identifies this manufacturer product page; it is not an orderable manufacturer SKU. Confirm the required model and configuration when requesting information.
Technical Specifications
| Bladder | Vinyl based polymer or Buna-N or Neoprene |
|---|---|
| Catalogue family reference | SHIELD-F-7953 |
| Concentrate Storage Capacity | 36-3200 Gallon – Vertical 50-6000 Gallon – Horizontal |
| Design Pressure | 175 psi (12.09 bar) |
| Foam Concentrate | Refer to the Ratio Controller Detail table below |
| Foam Concentrate Proportioning Orifice | 1%, 2%, 3%, 6% |
| Foam Pipes | Stainless Steel 316L |
| Painting External | Zinc Rich Primer with Red Enamel Finish |
| Painting Internal | Zinc Rich Primer with Coal Tar Epoxy Paint |
| Ratio Controller (Type, Size & Flow Range) | Refer to the Ratio Controller datasheet |
| Sight Glass Valve | Sight Gauge with Shut Off & Drain Valve |
| Storage Temperature | +1.7°C – +49°C |
| Tank Shell | Carbon Steel, SA 516 Gr.70. |
| Vent/Drain/NRV Valves | Brass/Bronze. |
| Water Pipe | Carbon Steel. sch. 40. |




