
Shield Flourine Free Foam
ENVIRO F3 FLOURINE FREE FOAM Synthetic Fluorine Free Foam Concentrate is a specially formulated, synthetic, firefighting foam concentrate. It contains no alkyl phenol ethoxylates or fluorine. As a result, it is 100% biodegradable and presents the lowest environmental impact of any Class B firefighting foam. It produces an exceptionally strong and cohesive foam blanket, aiding in rapid knockdown and extinguishment of hydrocarbon fires. The strong foam blanket also protects extinguished fuel from
Request a quoteDescription
ENVIROF3 FLOURINE FREE FOAM Synthetic Fluorine Free Foam Concentrate is a specially formulated, synthetic, firefighting foam concentrate. It contains no alkyl phenol ethoxylates or fluorine. As a result, it is 100% biodegradable and presents the lowest environmental impact of any Class B firefighting foam. It produces an exceptionally strong and cohesive foam blanket, aiding in rapid knockdown and extinguishment of hydrocarbon fires.
The strong foam blanket also protects extinguished fuel from re-ignition. It can also mitigate hazardous vapor of toxic materials. As this material possesses good penetration properties, it is very useful for extinguishing Class A deep-seated fires involving wood, paper, plastic, rubber, tires, etc.”
ENVIROF3 FLOURINE FREE FOAM is intended for use at a proportioning rate of 3% (3 parts Fluorine Free F3 concentrate to 97 parts water) on Class B hydrocarbon type fuels such as gasoline, kerosene, diesel, etc.
ENVIRO-ARF3 FLOURINE FREE FOAM is intended for use on hydrocarbons fules such as gasoline, kerosene, diesel, etc. and polar solvent / water miscible fule such as alcohols, ketones, esters etc. at the same use concentration of 3×3%.
Features
EATURES
- Because of its superior environmental impact properties, this product is ideally suited for municipalities and fire departments. Excellent wetting characteristics when used in combating Class A fuel fires.
- Suitable for use with either fresh, brackish, or sea water
- Contains no fluorosurfactants or fluorine!
- Suitable for use with aspirating foam nozzles
- Suitable for use with certain deluge or closed head foam water sprinkler systems
- If inadvertently frozen, thawing will render
- Product completely serviceable again
- Suitable for use with carbon steel, fiberglass, polyethylene or stainless steel. AR-FFF is not compatible with galvanized pipe or fittings in an undiluted form
Specifications
| PRODUCT | ENVIROF3 FLOURINE FREE FOAM | ENVIRO-ARF3 FLOURINE FREE FOAM |
| Use Concentration | 3% on hydrocarbon | 3% Hydrocarbon and/or Polar fuels |
| SPECIFIC GRAVITY @ 25°C | 1.02 ± 0.2 | 1.02 ± 0.2 |
| pH | 6.5 – 8.5 | 6.5 – 8.5 |
| Viscosity | < 50 cSt | 2500 ± 500 cSt |
| Storage temp | 1.70C to 490C | 1.70C to 490C |
| Drain Time* | 2 minutes 30 seconds | 5 minutes |
| Expansion * | >7 | >7 |
*Drainage time values depend on the equipment & the application conditions
Catalogue family reference SHIELD-F-7926 identifies this manufacturer product page; it is not an orderable manufacturer SKU. Confirm the required model and configuration when requesting information.
Technical Specifications
| Catalogue family reference | SHIELD-F-7926 |
|---|---|
| Drain Time* | 2 minutes 30 seconds; 5 minutes |
| Expansion * | >7; >7 |
| pH | 6.5 – 8.5; 6.5 – 8.5 |
| PRODUCT | ENVIRO F3 FLOURINE FREE FOAM; ENVIRO-AR F3 FLOURINE FREE FOAM |
| SPECIFIC GRAVITY @ 25°C | 1.02 ± 0.2; 1.02 ± 0.2 |
| Storage temp | 1.7 0 C to 49 0 C; 1.7 0 C to 49 0 C |
| Use Concentration | 3% on hydrocarbon; 3% Hydrocarbon and/or Polar fuels |
| Viscosity | < 50 cSt; 2500 ± 500 cSt |




