Shield Foam Pump Skid
Foam Concentrates & Equipment

Shield Foam Pump Skid

Shield·SKU: SHIELD-F-7962

Model Number : SD-FP-30 / SD-FP-50 / SD-FP-75 / SD-FP-101 / SD-FP-151 / SD-FP-175 / SD-FP-201 / SD-FP-225 / SD-FP-250 / SD-FP-350 / SHIELD Balanced Pressure or In-line Balanced Pressure Foam Proportioning Pump Skids are designed as per NFPA 11 to precisely proportion the foam concentrate into the water stream.The systems function over a range of flow and pressures. The Balanced Pressure or In-line Balanced Pressure Pump Proportioning System functions by maintaining an equal pressure in the foam

Request a quote

Description

Model Number : SD-FP-30 / SD-FP-50 / SD-FP-75 / SD-FP-101 / SD-FP-151 / SD-FP-175 / SD-FP-201 / SD-FP-225 / SD-FP-250 / SD-FP-350 /

SHIELD Balanced Pressure or In-line Balanced Pressure Foam Proportioning Pump Skids are designed as per NFPA 11 to precisely proportion the foam concentrate into the water stream.The systems function over a range of flow and pressures.

The Balanced Pressure or In-line Balanced Pressure Pump Proportioning System functions by maintaining an equal pressure in the foam concentrate inlet and water inlets to the proportioner, which allows the proportioner to be used over a wide range of pressure and flow.

The system consists of a foam pump, a diaphragm operated pressure balancing valve, and all the required piping valves and fittings assembled on a common steel base. SHIELD also offers the deluge valve and the atmospheric storage tank as an option, on the pump skid as per request. The skid units are available in different proportioner sizes ranging from 2 ½” to 8″.

 

SHIELD FOAM PUMP

Foam Pump is specialized non-corrosive construction pumps used for Fire Protection, especially for Fire-fighting foam concentrate pumping &Water mist pumping applications. These pumps can also be used for Stationary or mobile systems applications.

SHIELD Foam pump have 255 Duplex Stainless steel shafts to withstand seawater flush and any brand foam concentrate. Only 1 shaft seal is permitted and shaft seal shall be capable of dry operation for 10 minutes. Shaft seal shall be simple to repair and replace in the field.

Shaft seal materials are 316 stainless casing with double PTFE lips that allow for hydro test pressure to 350 psig without leakage. Pump rotor shall be spur gear design using corrosion resistant materials. Made from admiralty bronze alloy and composite materials that provide no tooth to tooth wear and no corrosion.  Foam pump connections shall be Groove, NPT or ANSI flange. Pump connections and end covers shall use O-ring seals for leak free operation and simple field replacement

Features

  • Compact design.
  • Major components are UL Listed.
  • Can add in options like deluge valve and concentrate tank on the skid if required.
  • All foam concentrate valves, pipe and fittings are of stainless steel or brass material for compatibility with all types of foam concentrates
  • Foam Concentrate tank can be of GRP or Stainless Steel material or Polyethylene
  • Pump skid supplied with manual override capabilities.
  • A bypass arrangement is provided for the system to function in the event of malfunctioning of pressure balancing diaphragm valve.

Specifications

NAFFCO Balanced Pressure or In-line Balanced Pressure Foam Proportioning Pump Skids are designed as per NFPA 11 and as per customer requirement. Below are the NAFFCO UL Listed foam concentrate pump flow range.

Model NF-FP-30 NF-FP-50 NF-FP-75 NF-FP-101 NF-FP-151
RPM 1500 1800 1500 1800 1500 1800 1500 1800 1500 1800
Flow GPM 24-36 40-55 40-56 57-72 65-90 90-115 88-119 121-152 107-140 152-185
Pressure psi 261-100 261-100 261-100 261-100 261-100 261-100 261-100 261-100 261-100 261-100
Port Size 1×1 1×1 1.5×1.5 1.5×1.5 1.5×1.5 1.5×1.5 2×2 2×2 2×2 2×2
Type of Connection Threaded or Grooved Grooved or Flange
Material (Body) Bronze
Pump Rotor Spur or Herringbone Gear
Shaft Type Key Shaft or Splined Input Shaft
Material(SHAFT) 255 Duplex Stainless Steel Shafts
Model NF-FP-175 NF-FP-201 NF-FP-225 NF-FP-250 NF-FP-350
RPM 1500 1800 1500 1800 1500 1800 1500 1800 1500 1800
Flow GPM 135-180 185-235 158-205 202-252 180-240 240-300 185-245 250-315 280-335 375-420
Pressure psi 261-100 261-100 261-100 261-100 261-100 261-100 261-100 261-100 261-100 261-100
Port Size 3×3 3×3 3×3 3×3 3×3 3×3 4×4 4×4 4×4 4×4
Type of Connection Grooved or Flange
Material (Body) Bronze
Pump Rotor Spur or Herringbone Gear
Shaft Type Key Shaft or Splined Input Shaft
Material(SHAFT) 255 Duplex Stainless Steel Shafts

Catalogue family reference SHIELD-F-7962 identifies this manufacturer product page; it is not an orderable manufacturer SKU. Confirm the required model and configuration when requesting information.

Official manufacturer product information

Technical Specifications

Catalogue family referenceSHIELD-F-7962
Flow GPM24-36; 40-55; 40-56; 57-72; 65-90; 90-115; 88-119; 121-152; 107-140; 152-185
Flow GPM (2)135-180; 185-235; 158-205; 202-252; 180-240; 240-300; 185-245; 250-315; 280-335; 375-420
Material (Body)Bronze
Material(SHAFT)255 Duplex Stainless Steel Shafts
ModelNF-FP-30; NF-FP-50; NF-FP-75; NF-FP-101; NF-FP-151
Model (2)NF-FP-175; NF-FP-201; NF-FP-225; NF-FP-250; NF-FP-350
Port Size1×1; 1×1; 1.5×1.5; 1.5×1.5; 1.5×1.5; 1.5×1.5; 2×2; 2×2; 2×2; 2×2
Port Size (2)3×3; 3×3; 3×3; 3×3; 3×3; 3×3; 4×4; 4×4; 4×4; 4×4
Pressure psi261-100; 261-100; 261-100; 261-100; 261-100; 261-100; 261-100; 261-100; 261-100; 261-100
Published construction statement 1Shaft seal materials are 316 stainless casing with double PTFE lips that allow for hydro test pressure to 350 psig without leakage. Pump rotor shall be spur gear design using corrosion resistant materials. Made from admiralty bronze alloy and composite materials that provide no tooth to tooth wear and no corrosion.  Foam pump connections shall be Groove, NPT or ANSI flange. Pump connections and end covers shall use O-ring seals for leak free operation and simple field replacement
Published manufacturer stated standards statement 1SHIELD Balanced Pressure or In-line Balanced Pressure Foam Proportioning Pump Skids are designed as per NFPA 11 to precisely proportion the foam concentrate into the water stream.The systems function over a range of flow and pressures.
Published manufacturer stated standards statement 2NAFFCO Balanced Pressure or In-line Balanced Pressure Foam Proportioning Pump Skids are designed as per NFPA 11 and as per customer requirement. Below are the NAFFCO UL Listed foam concentrate pump flow range.
Pump RotorSpur or Herringbone Gear
RPM1500; 1800; 1500; 1800; 1500; 1800; 1500; 1800; 1500; 1800
Shaft TypeKey Shaft or Splined Input Shaft
Type of ConnectionThreaded or Grooved; Grooved or Flange
Type of Connection (2)Grooved or Flange

Documents & Technical Downloads