Shield Fixed Type CAF System
Foam Concentrates & Equipment

Shield Fixed Type CAF System

Shield·SKU: SHIELD-F-8039

The SHIELD Fixed type Compressed Air Foam Fire Suppression System uses compressed air to propel firefighting foam. Thousands of tight radius bubbles quickly cool and smother a fire by providing a thick Vapor-sealing blanket of foam that virtually eliminates re-ignition. The foam will adhere to horizontal and vertical surfaces. This system allows the operator to seal a fuel spill and flammable Vapors with foam thus reducing or eliminating a potential fire. The system will discharge the foam appro

Request a quote

Description

The SHIELD Fixed type Compressed Air Foam Fire Suppression System uses compressed air to propel firefighting foam. Thousands of tight radius bubbles quickly cool and smother a fire by providing a thick Vapor-sealing blanket of foam that virtually eliminates re-ignition.

The foam will adhere to horizontal and vertical surfaces. This system allows the operator to seal a fuel spill and flammable Vapors with foam thus reducing or eliminating a potential fire.

The system will discharge the foam approximately 25-30 meters in a no wind condition allowing fire-fighting personnel without protective clothing to avoid thermal injuries. Trained personnel can accomplish all maintenance except hydrostatic pressure testing of the Air Cylinders, Premix Tank, and the Discharge Hose.

Features

  • Immediately isolate the surrounding Fire, protects transferring the fire to other places and prevent ignition of Fire further.
  • Saving time and water for Civil Defense Personnel while they fight with Fire.
  • Reducing damage to structures happens due to water.
  • Allows Firefighters a better safety distance from Fire.
  • Light hose lines for less stress for Fire-Fighters.
  • Less environmental damage.
  • Foamed areas signal a cooled surface.
  • Less water runoff carrying pollutants.
  • Reduced smoke emissions
  • Less pressure needed due to lack of friction loss.

Specifications

FIXED TYPE
Extinguishing Agent CAFS Special Foam CAFS Special Foam
Capacity (gallon) 400 gallons 500 Gallons
Foam Selection Dry/Wet Dry/Wet
Working Pressure for foam Cylinder 8/10 bar 8/10 bar
Cylinder Material Stainless Steel, Grade 316 L Stainless Steel, Grade 316 L
Test Pressure 30 bars 30 bars
Filling Pressure of Air Cylinder 150 bars 150 bars
Range Of Discharge 22-25 m 22-25 m
Discharge Duration 8 min. 10min.
Hose size & Length 1” or 1½” x 30 m
Operating temperature limits +5° C to +60° C +5° C to +60° C

Catalogue family reference SHIELD-F-8039 identifies this manufacturer product page; it is not an orderable manufacturer SKU. Confirm the required model and configuration when requesting information.

Official manufacturer product information

Technical Specifications

Capacity (gallon)400 gallons; 500 Gallons
Catalogue family referenceSHIELD-F-8039
Cylinder MaterialStainless Steel, Grade 316 L; Stainless Steel, Grade 316 L
Discharge Duration8 min.; 10min.
Extinguishing AgentCAFS Special Foam; CAFS Special Foam
Filling Pressure of Air Cylinder150 bars; 150 bars
Foam SelectionDry/Wet; Dry/Wet
Hose size & Length1” or 1½” x 30 m
Operating temperature limits+5° C to +60° C; +5° C to +60° C
Range Of Discharge22-25 m; 22-25 m
Test Pressure30 bars; 30 bars
Working Pressure for foam Cylinder8/10 bar; 8/10 bar

Documents & Technical Downloads