6000PLUS Optical Heat Sensor inc. VAD
Multi-Criteria Detectors

6000PLUS Optical Heat Sensor inc. VAD

protec·SKU: 6000PLUS/OPHT/VAD

Dual Technology Sensor; Combined Smoke and Heat Sensor; Ideal Multi-Application Sensor; Integrated EN54-23 Visual Alarm Device; Loop Powered; Low Current; Integral Short Circuit Isolator; Devices Display Address Number; VAD Classification Adjustable from 3m to 7.5m Room Coverage Volume

Request a quote

Description

The Protec Algo-Tec™ 6000PLUS sensor range has been developed to incorporate advanced fire sensing technology, electronic sounders, high intensity LED visual alarm devices (VAD) and speech enhanced talking sounder capability, all integrated within the sensor head and powered from the loop.

6000PLUS/OPHT/VAD Interactive addressable high performance optical smoke and heat multi-sensor.

The dual technology multi-criteria fire detector uses detection of smoke by scattering of infra-red within the optical chamber coupled with thermal enhancement of the optical sensitivity, as well as providing temperature detection equivalent to grade A2. The smoke and heat channels can be controlled independently for day/night operation with intelligent data being evaluated by the Protec Algo-Tec™ 6000 interactive programmable algorithms.

These sensors react across the range of fire products from large visible particles from smouldering fires to open flaming fires producing very hot smaller particles and are therefore suitable for use in all smoke detection applications. The environmental conditioning algorithms can be selected to filter unwanted alarms and enhance performance.

Sensor VAD – Compliance with DDA legislation is assisted by the addition of the Protec visual alarm device (VAD) to the 6000PLUSensor, to warn those with hearing impairments or in noisy environments. The VAD utilises a high intensity LED with lower power consumption and increased reliability when compared to alternative indicators. The VAD is located in the centre of the sensor, so can be viewed from all angles. Suitable for ceiling mounting the VAD distributes light in a cylindrical pattern to achieve the required minimum illumination of 0.4lux over the entire coverage area in accordance with EN54-23. The maximum mounting height is 3m with a coverage diameter of 7.5m. For smaller areas the device can be programmed on-site for coverage diameter of 3m or 5m at reduced power.

BASE Options

6000PLUS/BASE – Low profile common mounting base

6000PLUS/FFBASE – Fast fixing semi recessed base

Note – base options above are included in the product approval.

Official Protec product information

Technical Specifications

BrandProtec
Coverage7.5m, 5m or 3m cylindrical diameter
Device ProtocolAlgo-Tec™ 6000PLUS
Dimensions (mm)95ø x 54.5H
Environment-10°C to +50°C (95% R.H. non condensing)
Ingress ProtectionIP21C
IsolatorYes
Loop PoweredYes
Loop Standby Load0.55mA
Loop Voltage18 – 28V
Mounting Height3m
Peak Alarm Load16.5mA
VAD Flash Rate1Hz or 0.5Hz white flash
Weight (excluding base)103.35g

Documents & Technical Downloads

Advanced AXIS-OHX Axis EN Multi-Sensor Detector W Isolator

Advanced AXIS-OHX Axis EN Multi-Sensor Detector W Isolator

Indicative Price

from

Advanced AXIS-OH Axis EN Multi-sensor Detector

Advanced AXIS-OH Axis EN Multi-sensor Detector

Indicative Price

from

Cooper FXN922 Conventional Multi-Mode Detector

Cooper FXN922 Conventional Multi-Mode Detector

Indicative Price

from

Mircom MIX-2351TAP (Smoke and Thermal Sensor)

Mircom MIX-2351TAP (Smoke and Thermal Sensor)

Indicative Price

from