Fike DuraQuench Pro Water Mist Pump Skid
Water Mist Systems

Fike DuraQuench Pro Water Mist Pump Skid

Fike·SKU: FIKE-DURAQUENCH-PRO

Engineered skid-mounted pump system for low-pressure water mist at 175 psi, fed from a building water supply, tank or reservoir for unlimited discharge.

Request a quote

Description

Engineered skid-mounted pump system for low-pressure water mist at 175 psi, fed from a building water supply, tank or reservoir for unlimited discharge.

  • Function: Engineered skid-mounted pump system
  • Benefit: Connects directly to a building’s water supply, tank or reservoir to provide an unlimited discharge of water mist; may protect volumes with 75 percent less water than a conventional sprinkler system.
  • Manufacturer listed standards and approvals: FM | NFPA 750

Reliable & Cost-Effective Water Mist Suppression

In 2015 Fike launched DuraQuench, a low-pressure pumped water mist system which connects directly to a building’s water main or reservoir to provide unlimited fire suppression. The next evolution of this cost-effective water mist technology is now available with the Fike DuraQuench Pro!

The smaller and more efficient DuraQuench Pro offers reliable, eco-friendly fire suppression that avoids current market forces around chemical agents, the AIM Act, PFAS, etc., and the damaging effects of a traditional discharged sprinkler system in environments with mission-critical assets and invaluables.

No matter your application, DuraQuench Pro has you covered!

How does a deluge pumped water mist system (Fike DuraQuench) work?

In a dry pipe network, the water supply is held back by a deluge valve. In a wet pipe network, the water is held back by an OH-VSO nozzle.

In a dry pipe network, when a fire condition is detected a deluge valve is opened and the fire pump is activated sending pressurized water throught he network and into the open K6 nozzles.

In a wet pipe network, the bulb in the OH-VSO nozzles will break, the water flow switch paddle will move and go into alarm. The signal will go to the releasing panel and then to the fire pump controller to activate the fire pump.

Nozzle design shears the water into small droplets, which are effective at producing water vapor when they make contact with the fire.

Catalogue reference identifies this product or system family. Individual configurations and ordering part numbers vary; consult the official documentation.

Official Fike product information

Technical Specifications

ApprovalsFM Approved as a component of the Fike DuraQuench system when configured for deluge, wet pipe or pre-action; systems with a pressure maintenance (jockey) pump are not FM approved
ArrangementsDeluge, wet pipe and pre-action
BrandFike
ControllerFM Approved NFPA 20 fire pump controller with multiple voltage and frequency options
Operating pressure175 psi, versus the 1,000-2,000 psi typical of high-pressure water mist systems
Pump capacityMultiple pump capacity options; optional jockey pump package
StandardsNFPA 750, NFPA 20 and FM Datasheet 3-7
System typeEngineered skid-mounted pump system for low-pressure water mist
Water supplyConnects directly to a building water supply, tank or reservoir for unlimited discharge

Documents & Technical Downloads