IDP-FIRE-CO Multi CriteriaFire/CO Detector
Multi-Criteria Detectors

IDP-FIRE-CO Multi CriteriaFire/CO Detector

Farenhyt·SKU: FAR-F-354280

IDP-FIRE-CO is a plug-in addressable device that provides both fire and carbon monoxide (CO) detection.

Request a quote

Description

The IDP-FIRE-CO/IV/W detector combines four separate sensing elements in one unit (smoke, CO, light/flame, and heat) to sense multiple components of a fire. This approach enables enhanced sensitivity to real fire with heightened immunity to nuisance particulate. For CO, the detector’s electrochemical sensing cell creates a separate signal for life safety CO detection.

Released through the incomplete burning of various fuels, CO is a colourless, odourless and deadly gas that is virtually impossible to detect with the human senses. Because the potential exists for dangerous levels of CO to accumulate in almost any building, legislation mandating the use of CO detection in commercial spaces continues to increase across the U.S. and Canada. The IDP-FIRE-CO is listed to the UL 2075 standard for system-connected life safety carbon monoxide monitoring.

The IDP-FIRE-CO should be used in conjunction with the B200S intelligent sounder base (sold separately), which can generate either a Temp 3 pattern for fire or a Temp 4 pattern for CO alarm indication. With each sounder base carrying a unique address, the FACP can then command an individual sounder, or a group of sounders, to activate. The command set from the panel can be tailored to the specific event, allowing selection of tone, and group. For more information on the B200S refer to Data Sheet P/N 351182. IDP-FIRE-CO can also be used with the B210LP 6” standard base, the B200SR sounder base or the B224RB relay base.

Features & Benefits:
  • Unique ability to detect all four major elements of a fire: - Smoke - Carbon Monoxide (CO) - Light/flame - Heat
  • Separate CO detection signal
  • Highest nuisance alarm immunity
  • Automatic drift compensation of smoke sensor and CO cell
  • Uses only one address on the SLC
  • Real Test ® CO testing capability
  • UL 268 and UL 2075 listed
  • Separates audible signal for fire or CO alarm when used with B200S base
  • CO cell end-of-life warning and fault
Certifications:
  • P/N 351182
  • P/N 351180 Rev D Copyright

Official manufacturer product information

Technical Specifications

BrandFarenhyt; System Sensor
Unique ability to detect all four major elements of a fire- Smoke - Carbon Monoxide (CO) - Light/flame - Heat

Documents & Technical Downloads

IDP Ivory Detector Last Time Buy & Discontinuation Technical Bulletin

Technical Bulletin · en

Product Discontinuation Notice - Legacy IDP Series Detectors and Bases Technical Bulletin

Technical Bulletin · en

Emergency Communications Systems -ECS- Product Bulletin

Product Bulletin · en

SK-FIRE-CO multi-criteria photoelectric smoke CSFM Listing

Certificate Of Approval · en

IDP-FIRE-CO-W and IDP-FIRE-CO-IV Multi-Criteria Fire-CO Detector Data Sheet

Data Sheet · en

IDP-FIRE-CO-W AND IDP-FIRE-CO-IV Multi-Criteria Fire/CO Detector

Data Sheet · en

IDP-FIRE-CO Addressable Fire and CO Detector Data Sheet

Data Sheet · en

Farenhyt Series IDP-FIRE-CO Sell Sheet

Sell Sheet · en

Base - Detector Cross Reference (Legacy) Brochure

Brochure · en

IFP-2000/ECS RPS-2000 User Manual

User Manual · en

IFP-2000/RPS-2000 Analog/Addressable FACP User Manual

User Manual · en

Isolator Load Rating Table Brochure

Brochure · en

IFP-50 Analog/Addressable FACP User Manual

User Manual · en

IDP-Fire-CO Combination Fire and CO Detector User Manual

User Manual · en

IDP-FIRE-CO-W and IDP-FIRE-CO-IV Multi-Criteria Fire/CO Detector Data Sheet

Data Sheet · en

IFP-300/Addressable FACP User Manual

User Manual · en

IDP-FIRE-CO-W and IDP-FIRE-CO-IV Multi-Criteria CO and Smoke Sensor Installation Manual

Installation Manual · en

IFP-1000 Analog/Addressable FACP User Manual

User Manual · en

Analog/Addressable Devices with Intelligent Device (IDP) Protocol Data Sheet

Data Sheet · en

IFP-2100ECS User Manual

User Manual · en

IFP-100 Analog/Addressable FACP User Manual

User Manual · en

IDP-FIRE-CO-W and IDP-FIRE-CO-IV Multi-Criteria CO and Smoke Sensor Install Manual

Installation Manual · en

Advanced AXIS-OHX Axis EN Multi-Sensor Detector W Isolator

Advanced AXIS-OHX Axis EN Multi-Sensor Detector W Isolator

Indicative Price

from

Advanced AXIS-OH Axis EN Multi-sensor Detector

Advanced AXIS-OH Axis EN Multi-sensor Detector

Indicative Price

from

Cooper FXN922 Conventional Multi-Mode Detector

Cooper FXN922 Conventional Multi-Mode Detector

Indicative Price

from

Mircom MIX-2351TAP (Smoke and Thermal Sensor)

Mircom MIX-2351TAP (Smoke and Thermal Sensor)

Indicative Price

from