
Edwards SIGA-PHS (Intelligent 3D Multisensor Detector Photoelectric)
Indicative Price
Excluding local taxes and shipping.
Intelligent 3D Multisensor Detector Photoelectric, Heat (Replaced by SIGA-PHD)
Description
Edwards SIGA-PHS — Signature Series intelligent 3D multisensor detector, pairing a photoelectric smoke sensor with a 135°F (57°C) fixed-temperature heat element.
It weighs both sensing elements against time and against historical readings, so the alarm decision is made at the device, and it keeps working in stand-alone mode if loop communication fails.
- Photoelectric light-scattering sensing; UL and ULC range 0.67 to 3.77 percent per foot.
- Five alarm settings from 1.0 to 3.5 percent per foot, plus 20 pre-alarm steps.
- Heat element is fixed temperature only, at 135°F; UL listed spacing 30 ft.
- 15.2 to 19.95 VDC; 45 µA quiescent and in alarm, 9 mA during communication.
- 32°F to 100°F; one device address; UL, ULC, CSFM and MEA listed.
The head ships without a base — SIGA-SB standard, SIGA-RB relay, SIGA-IB isolator or SIGA-AB4G audible — and works only with the Signature Loop Controller. The SIGA-PHD, most often confused with it, is a different device: rate-of-rise at 15°F per minute, 50 ft centres, a wider 0.53 to 3.94 percent window. No Edwards document read says it replaces this detector.
Supplier availability note: discontinued/legacy. Confirm availability before ordering.
Documents & Technical Downloads
Related Products
View Cataloguearrow_forward
Advanced AXIS-OHX Axis EN Multi-Sensor Detector W Isolator
Indicative Price
from

Advanced AXIS-OH Axis EN Multi-sensor Detector
Indicative Price
from

Cooper FXN922 Conventional Multi-Mode Detector
Indicative Price
from

Mircom MIX-2351TAP (Smoke and Thermal Sensor)
Indicative Price
from
