
Edwards SIGA-PHD (Intelligent Multisensor Smoke and Heat Detector)
Indicative Price
Excluding local taxes and shipping.
Intelligent Multisensor Smoke and Heat Detector (Replaces SIGA-PHS)
Description
Edwards SIGA-PHD — Signature Series intelligent multisensor detector pairing an optical smoke sensor with rate-of-rise and fixed-temperature heat.
A photoelectric sensor answers slow smouldering fires well and fast flaming fires poorly; heat does the opposite. Feeding both into one on-board microprocessor lets the detector weigh the readings against stored historical data before deciding. Edwards is explicit that the heat element here is supplemental.
- Rate-of-rise heat at 15°F per minute with a fixed 135°F threshold
- Smoke sensitivity 0.53 to 3.94 %/ft.; five alarm and twenty pre-alarm settings
- 15.20 to 19.95 VDC; 51 µA normal, 68 µA alarm
- Air velocity 0 to 4,000 ft./min; heat spacing to 50 ft. centres maximum
- Listed to UL 268, UL 268A, UL 521, CAN/ULC-S529 and S530
- One address, up to 250 per loop; Signature Loop Controller only
No Edwards or Kidde document read for this page states that it replaces SIGA-PHS, so that claim sits here and not in the title. The two do differ: SIGA-PHS has a fixed-temperature heat element only, is listed at 30 ft. spacing and has a narrower sensitivity window.
Supplier availability note: discontinued/legacy. Confirm availability before ordering.
Documents & Technical Downloads
Related Products
View Cataloguearrow_forward
Advanced AXIS-OHX Axis EN Multi-Sensor Detector W Isolator
Indicative Price
from

Advanced AXIS-OH Axis EN Multi-sensor Detector
Indicative Price
from

Cooper FXN922 Conventional Multi-Mode Detector
Indicative Price
from

Mircom MIX-2351TAP (Smoke and Thermal Sensor)
Indicative Price
from
