
Eaton Zone monitor unit for addressable fire systems
Eaton's zone monitor unit enables the connection of a zone of Eaton conventional detectors and a separate zone of Eaton conventional callpoints (if required) to an Eaton addressable fire system. This interface allows for a wide variety of installations to be simplified without the use of specialist
Request a quoteDescription
Eaton's zone monitor unit enables the connection of a zone of Eaton conventional detectors and a separate zone of Eaton conventional callpoints (if required) to an Eaton addressable fire system. This interface allows for a wide variety of installations to be simplified without the use of specialist or customised equipment, and allows for easier connection to existing conventional detection zones, as long as the devices used are compatible. An extensive range of interfaces are available to support the Eaton range of control panels, providing solutions for most design requirements.
Highlights
- Simple installation: Plug and play
- Flexible design: Surface or semi recessed mounted
- Certification: EN54 approved
Pushing the limits with no maximum number of call points per zone
This interface was to designed to ease the process of expanding a system of up to 20 Eaton conventional detectors using existing wiring, saving on time and installation costs. No hard addressing is required making installation even more simple. The unit monitors inputs for open, short circuit and contact faults and allows an unlimited number of conventional call points per zone.
Product family: specifications and ordering options vary by model. Refer to the model details and official documentation.
Technical Specifications
| Alarm Current | 8mA |
|---|---|
| Callpoint Load | Unlimited |
| Construction | PC / ABS |
| Current with 20 Detectors | 3.4mA |
| Detector Load | 20 detectors per zone (max) |
| Dimensions (HxWxD) | 88mm x 147mm x 60mm |
| Humidity (Non-condensing) | 0 to 95% RH |
| Ingress Protection | IP40 |
| Manufacturer highlight: Certification | EN54 approved |
| Manufacturer highlight: Flexible design | Surface or semi recessed mounted |
| Manufacturer highlight: Simple installation | Plug and play |
| Operating Temperature | -10°C to +60°C |
| Operating Voltage | 18Vdc to 30Vdc |
| Quiescent Current | 2.8mA |
| Standards | EN54 Pt17 & Pt18 2005 |
| Suitable for use with | Eaton addressable fire alarm systems |
| Weight | 0.23kg |
| Zone Monitor Unit | CZMU352 |
| Zone Monitor Unit - intrinsically safe | CZMU352-IS |
Documents & Technical Downloads
Fire systems - Product Catalogue
Catalogues · en
Addressable Interfaces group B - Certificate of constancy of performance
Certification reports
Addressable zone monitor unit - Declaration of conformity
Certification reports
Addressable zone monitor unit - Declaration of performance
Certification reports · en
Addressable zone monitor unit - Declaration of performance
Certification reports · en
Addressable zone monitor unit - Declaration of performance
Certification reports · en
DECLARATION OF CONFORMITY
Certification reports
Addressable zone monitor unit - Installation manual
Installation instructions · en
Addressable zone monitor unit - Installation manual
Installation instructions · en
Addressable zone monitor unit - Installation manual
Installation instructions · en
Fire systems - Compatibility guide
Product specification guides · en
Eaton Life Safety products - Reference book
Success stories · en
Addressable zone monitor unit (intrinsically safe) - Datasheet
Technical data sheets
Addressable zone monitor unit - Datasheet
Technical data sheets
Fire system and devices - Extended warranty-policy and terms
Warranty guides




