Context Plus ECU-8NT 8 Line Master EVC Control Unit without Handset
Fire Telephone Master Stations

Context Plus ECU-8NT 8 Line Master EVC Control Unit without Handset

Context Plus·SKU: ECU-8NT

The ECU-8NT is an 8 line Master controller (with No handset) designed for use in the fire telephone systems and the disabled refuge systems of Context Plus. It offers communication over 8 lines. It can be networked with other 16 line, 8 line and 4 line Master controllers to create a fire telephone s

Request a quote

Description

• Ideal for disabled refuge and fire telephone applications.
• Does not include a handset – ideal for use on networked SigTEL systems that do not require multiple control points.
• Can be connected to up to eight disabled refuge or fire telephone outstations.
• Improved networking capability allow systems of up to 224 lines to be created with optional/additional desk unit control.
• Supplied with a backlit LCD display.
• Unique ‘auto-learn’ facility allows fast system set up.
• Can be semi-flush mounted using an AFP385 bezel.
• Operation can be maintained for 24 hours (standby) and 3 hours (in use) using 2 x 12V 7 Ahr batteries.
• Easily interfaced to NC951 accessible toilet alarms, PDA range hearing loop systems, strobes, CCTV activation relays, etc

Approvals/certifications:  Facilitates compliance with BS5839-9 when correctly installed.
Mains supply:  230V 50/60Hz.
Mains rated current:  500mA.
Internal power supply: 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to:  1.5A @ 230Vac
Quiescent current:  100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation.
Max battery size and type:  2 x 12V 7Ah VRLA connected in series.
No. of lines: 8.
Auxiliary relays:  Changeover fault relay (failsafe). 30V 1A max.
Open collector outputs:  (OP1): Activates when the ECU is ringing; (OP2) Activates when there is an active accessible toilet alarm call; (OP3) Closes when the handset is off hook and remains active for 2 mins after it is replaced. 24V, 50mA max.
Other outputs:  +24 V. Typically used to supply power to equipment connected to the ECU’s open collector outputs (relays, etc).
Engineer (AL3) functions:  Engineer mode and reset buttons (internal).
Indicators:  128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on.
Controls:  Silence Buzzer. Other controls are available but are not applicable as no handset is provided on this unit.
Product dimensions (mm):  410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
Construction & finish:  Metal lid and base, RAL7035 grey texture.
IP Rating:  IP20.
Weight:  3.1kg (without batteries).
Operating conditions/temperature:  -5ºC to +40ºC. Max relative humidity: 95%.

• Ideal for disabled refuge and fire telephone applications.
• Does not include a handset - ideal for use on networked SigTEL systems that do not require multiple control points.
• Can be connected to up to eight disabled refuge or fire telephone outstations.
• Improved networking capability allow systems of up to 224 lines to be created with optional/additional desk unit control.
• Supplied with a backlit LCD display.
• Unique ‘auto-learn’ facility allows fast system set up.
• Can be semi-flush mounted using an AFP385 bezel.
• Operation can be maintained for 24 hours (standby) and 3 hours (in use) using 2 x 12V 7 Ahr batteries.
• Easily interfaced to NC951 accessible toilet alarms, PDA range hearing loop systems, strobes, CCTV activation relays, etc

Approvals/certifications:  Facilitates compliance with BS5839-9 when correctly installed.
Mains supply:  230V 50/60Hz.
Mains rated current:  500mA.
Internal power supply: 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to:  1.5A @ 230Vac
Quiescent current:  100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation.
Max battery size and type:  2 x 12V 7Ah VRLA connected in series.
No. of lines: 8.
Auxiliary relays:  Changeover fault relay (failsafe). 30V 1A max.
Open collector outputs:  (OP1): Activates when the ECU is ringing; (OP2) Activates when there is an active accessible toilet alarm call; (OP3) Closes when the handset is off hook and remains active for 2 mins after it is replaced. 24V, 50mA max.
Other outputs:  +24 V. Typically used to supply power to equipment connected to the ECU's open collector outputs (relays, etc).
Engineer (AL3) functions:  Engineer mode and reset buttons (internal).
Indicators:  128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on.
Controls:  Silence Buzzer. Other controls are available but are not applicable as no handset is provided on this unit.
Product dimensions (mm):  410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
Construction & finish:  Metal lid and base, RAL7035 grey texture.
IP Rating:  IP20.
Weight:  3.1kg (without batteries).
Operating conditions/temperature:  -5ºC to +40ºC. Max relative humidity: 95%.

Sales Leaflet

View Leaflet

Official manufacturer product information

Technical Specifications

Approvals/certificationsFacilitates compliance with BS5839-9 when correctly installed.
Auxiliary relaysChangeover fault relay (failsafe). 30V 1A max.
ControlsSilence Buzzer. Other controls are available but are not applicable as no handset is provided on this unit.
Engineer (AL3) functionsEngineer mode and reset buttons (internal).
Fire telephone lines8 Line
Indicators128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on.
Internal power supply19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
IP RatingIP20.
Mains rated current500mA.
Mains supply230V 50/60Hz.
Max battery size and type2 x 12V 7Ah VRLA connected in series.
No. of lines8.
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.
Other outputs+24 V. Typically used to supply power to equipment connected to the ECU’s open collector outputs (relays, etc).
Product dimensions (mm)410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
Quiescent current100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation.
Total output current limited to1.5A @ 230Vac
Weight3.1kg (without batteries).

Documents & Technical Downloads