
Context Plus 8 Line Master EVC control unit c/w line cards, handset and display. Wall-mounting, needs 2 x 12V 7.0A/H batteries
The ECU-8 is an 8 line Master controller designed for use in the fire telephone systems and the disabled refuge systems of Context Plus. The ECU-8 Master controller allows an operator to communicate with up to eight fire telephone or disabled refuge outstations. It offers dual communication over 8 l
Request a quoteDescription
• Ideal for disabled refuge and fire telephone applications.
• Allows operators to communicate with up to eight disabled refuge or fire telephone outstations.
• Recently upgraded to include a semi-recessed, less obtrusive handset.
• Improved networking capability allow systems of up to 224 lines to be created with optional/additional desk unit control.
• Backlit LCD and unique ‘auto-learn’ facility allows fast system set up.
• Can be semi-flush mounted using an EVC385 bezel.
• Operation can be maintained for 24 hours (standby) and 3 hours (in use) using 2 x 12V 7 Ahr batteries.
• Easily interfaced to NC951 accessible toilet alarms, PDA range hearing loop systems, strobes, CCTV activation relays, etc
Approvals/certifications: Facilitates compliance with BS5839-9 when correctly installed.
Mains supply: 230V 50/60Hz.
Mains rated current: 500mA.
Internal power supply: 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to: 1.5A @ 230Vac
Quiescent current: 100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation.
Max battery size and type: 2 x 12V 7Ah VRLA connected in series.
No. of lines: 16 (extra lines available on networked systems).
Auxiliary relays: Changeover fault relay (failsafe). 30V 1A max.
Open collector outputs: (OP1): Activates when the ECU is ringing; (OP2) Activates when there is an active accessible toilet alarm call; (OP3) Closes when the handset is off hook and remains active for 2 mins after it is replaced. 24V, 50mA max.
Other outputs: +24 V. Typically used to supply power to equipment connected to the ECU’s open collector outputs (relays, etc).
Engineer (AL3) functions: Engineer mode and reset buttons (internal).
Indicators: 128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on.
Controls: Handset; Scroll buttons; Hold; Call Accept; Function; Directory; Silence Buzzer.
Product dimensions (mm): 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). Handset protrudes 80 mm beyond lid.
Construction & finish: Metal lid and base, RAL7035 grey texture.
IP Rating: IP20.
Weight: 3.1kg (without batteries).
Operating conditions/temperature: -5ºC to +40ºC. Max relative humidity: 95%.
• Ideal for disabled refuge and fire telephone applications.
• Allows operators to communicate with up to eight disabled refuge or fire telephone outstations.
• Recently upgraded to include a semi-recessed, less obtrusive handset.
• Improved networking capability allow systems of up to 224 lines to be created with optional/additional desk unit control.
• Backlit LCD and unique ‘auto-learn’ facility allows fast system set up.
• Can be semi-flush mounted using an EVC385 bezel.
• Operation can be maintained for 24 hours (standby) and 3 hours (in use) using 2 x 12V 7 Ahr batteries.
• Easily interfaced to NC951 accessible toilet alarms, PDA range hearing loop systems, strobes, CCTV activation relays, etc
Approvals/certifications: Facilitates compliance with BS5839-9 when correctly installed.
Mains supply: 230V 50/60Hz.
Mains rated current: 500mA.
Internal power supply: 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to: 1.5A @ 230Vac
Quiescent current: 100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation.
Max battery size and type: 2 x 12V 7Ah VRLA connected in series.
No. of lines: 16 (extra lines available on networked systems).
Auxiliary relays: Changeover fault relay (failsafe). 30V 1A max.
Open collector outputs: (OP1): Activates when the ECU is ringing; (OP2) Activates when there is an active accessible toilet alarm call; (OP3) Closes when the handset is off hook and remains active for 2 mins after it is replaced. 24V, 50mA max.
Other outputs: +24 V. Typically used to supply power to equipment connected to the ECU's open collector outputs (relays, etc).
Engineer (AL3) functions: Engineer mode and reset buttons (internal).
Indicators: 128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on.
Controls: Handset; Scroll buttons; Hold; Call Accept; Function; Directory; Silence Buzzer.
Product dimensions (mm): 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). Handset protrudes 80 mm beyond lid.
Construction & finish: Metal lid and base, RAL7035 grey texture.
IP Rating: IP20.
Weight: 3.1kg (without batteries).
Operating conditions/temperature: -5ºC to +40ºC. Max relative humidity: 95%.
Sales Leaflet
View LeafletTechnical Specifications
| Approvals/certifications | Facilitates compliance with BS5839-9 when correctly installed. |
|---|---|
| Auxiliary relays | Changeover fault relay (failsafe). 30V 1A max. |
| Controls | Handset; Scroll buttons; Hold; Call Accept; Function; Directory; Silence Buzzer. |
| Engineer (AL3) functions | Engineer mode and reset buttons (internal). |
| Fire telephone lines | 8 Line |
| Indicators | 128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on. |
| Internal power supply | 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault). |
| IP Rating | IP20. |
| Mains rated current | 500mA. |
| Mains supply | 230V 50/60Hz. |
| Max battery size and type | 2 x 12V 7Ah VRLA connected in series. |
| No. of lines | 16 (extra lines available on networked systems). |
| Operating conditions/temperature | -5ºC to +40ºC. Max relative humidity: 95%. |
| Other outputs | +24 V. Typically used to supply power to equipment connected to the ECU’s open collector outputs (relays, etc). |
| Product dimensions (mm) | 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). Handset protrudes 80 mm beyond lid. |
| Quiescent current | 100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation. |
| Total output current limited to | 1.5A @ 230Vac |
| Weight | 3.1kg (without batteries). |



