
Silent Knight SK-HEAT-HT-W 190F Addressable Heat Detector
Indicative Price
Excluding local taxes and shipping.
The Silent Knight SK-HEAT-HT-W is a white intelligent addressable high-temperature heat detector designed for compatible Honeywell Silent Knight fire alarm control panels using SK protocol. Factory preset for 190 F (88 C) fixed-temperature detection , it features thermistor sensing technology, rotar
Description
The Silent Knight SK-HEAT-HT-W is a white intelligent addressable high-temperature heat detector designed for compatible Honeywell Silent Knight fire alarm control panels using SK protocol. Factory preset for 190 F (88 C) fixed-temperature detection, it features thermistor sensing technology, rotary-switch addressing, and dual-color LEDs with 360-degree visibility. Operating at 15-32 VDC with a typical standby current of 200 A at 24 VDC, the detector supports up to 159 device addresses on compatible systems. Its high-temperature configuration operates in ambient conditions from -4 F to 150 F (-20 C to 66 C).
Silent Knight SK-HEAT-HT-W Addressable High-Temperature Heat Detector, 190 F, White
The Silent Knight SK-HEAT-HT-W High-Temperature Heat Detector provides intelligent thermal fire detection for commercial and institutional buildings equipped with compatible Honeywell Silent Knight addressable fire alarm systems. Part of the SK-HEAT-W Series, this white, low-profile detector uses an advanced thermistor sensing circuit to monitor ambient temperature and transmit alarm conditions to the connected fire alarm control panel. The device is factory preset to activate at 190 F (88 C), making it suitable for locations where elevated normal operating temperatures may make standard 135 F heat detectors inappropriate. Typical applications include mechanical rooms, equipment areas, industrial spaces, and other environments requiring high-temperature fire detection. Unlike photoelectric smoke detectors, the SK-HEAT-HT-W responds to temperature rather than airborne smoke particles.
The SK-HEAT-HT-W operates over a 15-32 VDC signaling line circuit (SLC) and communicates through the Silent Knight SK addressable protocol. Its typical operating current is 200 A at 24 VDC, with a maximum alarm current of 2 mA and maximum specified current of 4.5 mA. Two rotary decimal switches allow installers to assign individual device addresses, supporting up to 159 addresses when permitted by the connected control panel. The detector features two programmable multicolor LEDs with 360-degree visibility, providing green indication during normal polling and steady red indication during alarm conditions. Additional capabilities include built-in device-type identification, panel-initiated remote testing, and a magnet-activated functional test switch. Supported control panels can also configure LED behavior and display detector addresses during walk testing.
The Silent Knight SK-HEAT-HT-W uses a field-programmable thermal sensing platform capable of supporting a 135 F fixed-temperature mode, a combined 135 F fixed-temperature and rate-of-rise mode, or a 190 F fixed high-temperature mode, depending on control panel capabilities. The SK-HEAT-HT-W defaults to the 190 F setting when advanced programming is unavailable. In its high-temperature configuration, the detector operates from -4 F to 150 F (-20 C to 66 C), with 10-93% non-condensing relative humidity. Manufacturer documentation identifies UL-approved detector spacing up to 50 feet center-to-center and FM-approved spacing of 25 25 feet, subject to ceiling conditions and installation requirements. The detector is UL 521 Listed for heat detection, with additional FM and California State Fire Marshal approvals documented for the series. Final detector spacing and temperature settings must comply with NFPA 72 and the applicable authority having jurisdiction.
The SK-HEAT-HT-W features a plug-in detector design compatible with designated Silent Knight mounting bases, including the B300-6 flanged base and B501-WHITE flangeless base. With the B300-6 base, the installed detector measures approximately 2 inches high and 6.1 inches in diameter; the B501 configuration has an approximately 4-inch diameter. Its tamper-resistant mounting capability helps prevent unauthorized removal, while the removable detector head simplifies inspection, cleaning, and replacement. Optional accessories include the RA100Z remote LED annunciator, M02-04-00 test magnet, and compatible sounder, relay, or isolator bases. Standard mounting bases require an electrical backbox at least 1.5 inches deep, with wiring connected according to the manufacturer's supervised SLC instructions. The SK-HEAT-HT-W is intended for compatible addressable fire alarm systems and is not a standalone heat alarm. Installers should verify the selected base, control panel compatibility, detector spacing, and programmed thermal mode before commissioning.
UPC: 783863051036
Also known as: SK-HEATHTW, SKHEATHTW
Technical Specifications:
|
Technical Specifications
| Brand | Silent Knight |
|---|---|
| Color | White |
| Manufacturer Part Number | SK-HEAT-HT-W |
| Package Contents | SK-HEAT-W Temperature Sensor 6" Mounting Base Trim Ring |
| Product Color | White |
| Product Series | SK-HEAT-W |
| Product Type | Fixed Temperature Heat Detector |
| UPC | 783863051036 |
Documents & Technical Downloads
Related Products
View Cataloguearrow_forward
Context Plus Heat Detector
Indicative Price
from

Mircom MIX-4030-ISO (TriMode Heat Detector WO Isolation)
Indicative Price
from

Mircom MIX-5351AP(A) (Intelligent Heat Detector)
Indicative Price
from

Mircom MIX-5351RAP(A) (Thermal Sensor Fixed Heat and Rate of Rise)
Indicative Price
from
