Shield PRESSURE SWITCH
Sprinkler Accessories

Shield PRESSURE SWITCH

Shield·SKU: SHIELD-F-6577

MODEL: SD-PS SERIES The SD-PS Series Pressure Switches shall be installed on the sprinkler system with connection as shown on the drawings and/or as specified herein. Pressure switches shall be of the bellows-activated type. Switches shall have a maximum service pressure rating of 300 psi and shall be factory adjusted to operate at a pressure of 4 – 8 psi. There shall be one (1) or two (2) SPDT contacts rated at 10.0 Amp @ 125/250 VAC and 2.5 Amp @ 30 VDC. The contractor shall furnish and instal

Request a quote

Description

MODEL: SD-PS SERIES

The SD-PS Series Pressure Switches shall be installed on the sprinkler system with connection as shown on the drawings and/or as specified herein. Pressure switches shall be of the bellows-activated type. Switches shall have a maximum service pressure rating of 300 psi and shall be factory adjusted to operate at a pressure of 4 – 8 psi. There shall be one (1) or two (2) SPDT contacts rated at 10.0 Amp @ 125/250 VAC and 2.5 Amp @ 30 VDC. The contractor shall furnish and install, where indicated on the plans, pressure switches according to appropriate NFPA standards. Switches shall be provided with a ½˝ NPT male pressure connection to be connected to the alarm check valve of a “wet” sprinkler system, into the intermediate chamber of a “dry” system, or to a pre-action or deluge valve. They shall be activated by any flow of water equal to or in excess of the discharge from one sprinkler head. Switches shall provide 1 knockout type and 1 open hole for ½˝ conduit fitting attachment and a ground screw provision for electrical grounding. The switch enclosure shall be weatherproof. The cover shall incorporate tamper-resistant screws. The unit shall be listed by Underwriters Laboratories, Inc. and approved by Factory Mutual.

 

Features

  • Sensitivity adjustment wheel, no special tools required
  • Reinforced diaphragm resists pressure spikes
  • Two conduit entrances
  • Both one- and two-switch models available

Specifications

  • Maximum Operating Pressure: 300psi
  • Maximum Adjustment Pressure Range:
    • SD-PS1001/SD-PS1002: 4-20 PSI
    • SD-PS4001/SD-PS4002: 10-100 PSI
    • SD-PS12001/SD-PS12002: 10-200 PSI

 

FACTORY SETTING
  • SD-PS1001 / SD-PS1002 : 4-8 PSI
  • SD-PS4001 : Operates at decreasing pressure at 30 PSI
  • SD-PS4002 : Operates at increasing pressure at 50 PSI and decreasing pressure at 30 PSI
  • SD-PS12001 : Operates at decreasing pressure at 110 PSI
  • SD-PS12002 : Operates at increasing pressure at 130 PSI and decreasing pressure at 30 PSI

Catalogue family reference SHIELD-F-6577 identifies this manufacturer product page; it is not an orderable manufacturer SKU. Confirm the required model and configuration when requesting information.

Official manufacturer product information

Technical Specifications

Catalogue family referenceSHIELD-F-6577
Maximum Adjustment Pressure RangeSD-PS1001/SD-PS1002: 4-20 PSI SD-PS4001/SD-PS4002: 10-100 PSI SD-PS12001/SD-PS12002: 10-200 PSI
Maximum Operating Pressure300psi
Published pressure statement 1Maximum Operating Pressure: 300psi
Published pressure statement 2Maximum Adjustment Pressure Range: SD-PS1001/SD-PS1002: 4-20 PSI SD-PS4001/SD-PS4002: 10-100 PSI SD-PS12001/SD-PS12002: 10-200 PSI
Published pressure statement 3SD-PS1001 / SD-PS1002 : 4-8 PSI
Published pressure statement 4SD-PS4001 : Operates at decreasing pressure at 30 PSI
Published pressure statement 5SD-PS4002 : Operates at increasing pressure at 50 PSI and decreasing pressure at 30 PSI
Published pressure statement 6SD-PS12001 : Operates at decreasing pressure at 110 PSI
Published pressure statement 7SD-PS12002 : Operates at increasing pressure at 130 PSI and decreasing pressure at 30 PSI
SD-PS1001 / SD-PS10024-8 PSI
SD-PS1001/SD-PS10024-20 PSI
SD-PS12001Operates at decreasing pressure at 110 PSI
SD-PS12001/SD-PS1200210-200 PSI
SD-PS12002Operates at increasing pressure at 130 PSI and decreasing pressure at 30 PSI
SD-PS4001Operates at decreasing pressure at 30 PSI
SD-PS4001/SD-PS400210-100 PSI
SD-PS4002Operates at increasing pressure at 50 PSI and decreasing pressure at 30 PSI

Documents & Technical Downloads