
Shield ADDRESSABLE MIKRO CONTROL PANELS
Mikro is a single loop, analogue addressable control panel, based on the Shield protocols. It targets small to medium installations. The key points of this panel are low cost, ease of use through an intuitive user interface, expandability through networking and programming flexibility all in a robust, high quality construction. Easy for both installers and users provides an ideal solution for a certified entry level panel easily integrated in future installation expansions.
Request a quoteDescription
Mikro is a single loop, analogue addressable control panel, based on the Shield protocols. It targets small to medium installations. The key points of this panel are low cost, ease of use through an intuitive user interface, expandability through networking and programming flexibility all in a robust, high quality construction. Easy for both installers and users provides an ideal solution for a certified entry level panel easily integrated in future installation expansions.
Features
- One Loop Analogue Addressable control panels.
- 2 Conventional Zones (Maximum 20 detectors per zone).
- Manual add/remove of loop devices.
- Up to 15 groups of outputs for simultaneous activation.
- 2 Supervised Siren Outputs.
- Siren pattern selection for on board (switched) and loop devices.
- Storage of up to 2000 log events
- System LED indications: Power, Fault, Alarm, Pre-Alarm, Delay Active, Sirens Silenced, On Test.
- Walk Test installation testing feature.
- Weekly reminder for system test.
- Remote software monitoring and programming.
Specifications
TECHNICAL DATA| Number of loops | 1 |
| Loop current | 400mA |
| Fire zones / Zonal indicators | 16 (Mikro 16) |
| Conventional zones | 2 (Maximum 20 detectors per zone) |
| Conventional zones termination resistors | 4,7Κ Ohms / 1W |
| Supervised siren outputs | 2 outputs, 24VDC ±10%, 1A max, fused and monitored |
| Generic trouble output (on main unit) non-monitored | Dry relay contacts NO – C – NC |
| Generic Inputs | 2 auxiliary, internally pulled up inputs.1.5mA sink activation current |
| Relay Outputs | 2 general relay outputsN/O or N/C (jumper selectable) dry contacts 28V/3A max |
| PGM Outputs | PGM outputsOpen collector, 200mA sink max current, 30V max handling |
| Earth faults detection and indication | Front panel LCD indication & buzzer |
| Display | 4 lines of 20 characters LCD |
| Mains Power | 220 VAC 50Hz |
| Mains supply fuse | 1.6A 250V |
| Power Supply | 24 VDC / 2.50A |
| AUX output | 24VDC +/- 700, %10mA max, current limited, monitored |
| Battery Backup power | 2x 12V / 7Ah sealed lead acid gel batteries |
| Battery health monitoring (periodic load test) | Every 90 seconds |
| Enclosure | Epoxy powder coated metal box |
| Dimensions (H x W x D) [mm] | 315 x 425 x 100 |
| IP rating | IP30 |
Catalogue family reference SHIELD-F-7125 identifies this manufacturer product page; it is not an orderable manufacturer SKU. Confirm the required model and configuration when requesting information.
Technical Specifications
| AUX output | 24VDC +/- 700, %10mA max, current limited, monitored |
|---|---|
| Battery Backup power | 2x 12V / 7Ah sealed lead acid gel batteries |
| Battery health monitoring (periodic load test) | Every 90 seconds |
| Catalogue family reference | SHIELD-F-7125 |
| Conventional zones | 2 (Maximum 20 detectors per zone) |
| Conventional zones termination resistors | 4,7Κ Ohms / 1W |
| Dimensions (H x W x D) [mm] | 315 x 425 x 100 |
| Display | 4 lines of 20 characters LCD |
| Earth faults detection and indication | Front panel LCD indication & buzzer |
| Enclosure | Epoxy powder coated metal box |
| Fire zones / Zonal indicators | 16 (Mikro 16) |
| Generic Inputs | 2 auxiliary, internally pulled up inputs.1.5mA sink activation current |
| Generic trouble output (on main unit) non-monitored | Dry relay contacts NO – C – NC |
| IP rating | IP30 |
| Loop current | 400mA |
| Mains Power | 220 VAC 50Hz |
| Mains supply fuse | 1.6A 250V |
| Number of loops | 1 |
| PGM Outputs | PGM outputsOpen collector, 200mA sink max current, 30V max handling |
| Power Supply | 24 VDC / 2.50A |
| Relay Outputs | 2 general relay outputsN/O or N/C (jumper selectable) dry contacts 28V/3A max |
| Supervised siren outputs | 2 outputs, 24VDC ±10%, 1A max, fused and monitored |
| System LED indications | Power, Fault, Alarm, Pre-Alarm, Delay Active, Sirens Silenced, On Test. |
Documents & Technical Downloads
Related Products
View Cataloguearrow_forward
Simplex 4007-9201 (Fire Alarm Control Panel)
Indicative Price
from

Simplex 4010-9501 (4010Es Facp 240V)
Indicative Price
from

Simplex 4010-9502 (4010Es Facp 240V Red)
Indicative Price
from

