
TCF-142 Series - RS485 to Fibre Converters
Ring and point-to-point transmission; Protects against electrical interference and chemical corrosion; Automatic Baud Rate Detection; Low Current; Wide Temperature Range; Single Mode and Multi Mode Fibre Compatible
Request a quoteDescription
The Protec fibre converters are used to convert the RS485 signalling used when networking equipment, to optical fibre signals. Two variants of the interface are available, one that is compatible with multimode optical fibre and one that is compatible with single mode fibre. The correct unit must be specified for the fibre being used in a particular installation.
The units automatically detect the Baud rate being used on the system, meaning that, in general, no setup is required.
The interface is compatible with Protec 6500 fire alarm control equipment and also Cirrus HYBRID, Cirrus CCD, Pro Point Plus and Cirrus RDP range of devices.
Order Codes TCF-142-M-ST – Multi-mode ST Connector TCF-142-S-ST – Single-mode ST Connector
Technical Specifications
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
|---|---|
| Brand | Protec |
| Dimensions (with ears) | (W)90 x (H)100 x (D)22 mm |
| Dimensions (without ears) | (W)67 x (H)100 x (D)22 mm |
| Dispersion Penalty (dB) | 1 |
| Fibre Cable Requirements | 50/125 μm, 800 MHz |
| Housing | Metal |
| Input Current | 15mA @ 24 VDC |
| Input Voltage | 12 to 48 VDC |
| Installation | Wall mounting |
| IP Rating | IP30 |
| Link Budget (dB) | 15 |
| Low-Speed Fibre Module | Multi-Mode |
| No. of Power Inputs | 1 |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Optical Power | TX Range (dBm) |
| Overload Current Protection | Supported |
| Power Connector | Terminal block |
| Power Consumption | 15mA @ 24 VDC |
| Pull High/Low Resistor for RS-485 | 150 kΩ (¼W ± 5%) |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RX Range (dBm) | 0 to -20 |
| RX Range (nm) | 800 to 900 |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Terminator for RS-485 | 120Ω (¼W ± 5%) |
| TX Range (nm) | 840 to 860 |
| Typical Distance | 5 Km |
| Wavelength | Typical (nm) |
| Weight | 320g |
Documents & Technical Downloads
Related Products
View Cataloguearrow_forward
Simplex 4010-6301 (4120 SM-L Duplex Fiber Media)
Indicative Price
from

Simplex 4010-6302 (4120 SM-R Duplex Fiber Media)
Indicative Price
from

Simplex 4010-6304 (MM-R Duplex Fiber Media)
Indicative Price
from

Simplex 4010-6303 (4120 MM-L Duplex Fiber Media)
Indicative Price
from
