Sigma Extinguishant Status Indicators
Extinguishant Control Panels

Sigma Extinguishant Status Indicators

protec·SKU: SIGMA-SI

Detailed indication of the status of the control panel; Monitored data connection; Countdown timer shows time remaining until release; Manual only and Automatic & Manual mode select keyswitch option; Four wire connection (data and power); Protected dual action manual release switch option;...

Request a quote

Description

The Sigma Si range of status indicators provide detailed status information for Sigma XT/XT+ extinguishant release control equipment.

All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.

For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.

All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.

All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.

Certified compliant with BS EN12094-1 when used with Sigma XT control equipment.

Official Protec product information

Technical Specifications

BrandProtec
Cable capacity2.5mm² per terminal
IP Rating (Standard unitIP30
IP Rating (Weatherproof unit)IP65
Max. number of status units7
Maximum current draw0.07A
Monitored inputs99 ohms to 0 ohms
Monitored inputs EOL resistor6K8 0.5W Resistor
Monitored inputs normal threshold8K ohm to 1K ohm
Monitored inputs trigger threshold700 ohms to 100 ohms
Power supply21 to 30 V DC
Quiescent current0.033A
Short circuit threshold data connectionTwo wire RS485 connection (max 1200 metres)
Standard Indicator Dimensions (mm)186(W) x 132(H) x 50(D)
Weatherproof Indicator Dimensions (mm)256(W) x 170(H) x 60(D)
Weight1kg (all units)

Documents & Technical Downloads