Single Channel Auxiliary Powered Zone Alarm Interface
Interface Modules

Single Channel Auxiliary Powered Zone Alarm Interface

protec·SKU: 6000/APZA

Easy to Use; Reduce Installation Cost; Simple Expansion Using Existing Wiring; FAST™ Addressing; Integral Short Circuit Isolator; Auxiliary 24V dc Powered; Protec Conventional Detector and Call Point Zone; Built in Sounder Circuit Monitored for Open / Short Circuit Faults

Request a quote

Description

The Protec 6000/APZA is a zone alarm interface which allows the 6000 series intelligent addressable loop to interface to a zone of conventional devices and a conventional sounder circuit.

This interface is ideally suited for small conventional fire detection to be fully integrated with Protec Intelligent addressable systems. The 6000/APZA is powered using an external EN54 Part 4 power supply. It can support up to 10 Protec conventional (3000PLUS) detectors.

The zone end of line is selectable using the on board DIL switch and can be programmed to resistive or capacitive as per the requirement of BS5939-1. The sounder circuit is monitored for open and short circuit faults and has 1A current drive capability.

The interface has an inbuilt loop short circuit isolator fitted as standard.

Official Protec product information

Technical Specifications

24V Auxiliary Voltage18 to 28V dc
Auxiliary 24V Current0.6mA Quiescent + detector load ( 13mA max ) + resistive end of line load ( 3mA ) 7.5mA Alarm, plus zone circuit current and sounder circuit current
BrandProtec
Detectors SupportedProtec 3000 and 3000PLUS
Environment-10 to 50°C (maximum 95% RH no condensation or icing)
IndicationsOn-board red indicating LED showing when the device is polled, or in the alarm state
Loop Alarm Current0.6mA
Loop IsolatorYes
Loop ProtocolProtec Algo-tec 6000™
Loop Quiescent Current0.6mA
Loop Voltage18 to 28V peak loop
Manual Call PointMust be fitted with a 330Ω or 180Ω series resistor
Number of Addresses1
Product ApprovalBSI Kitemark No: KM589455 CoCP No: 0086-CPR-589456 DoP No: PFD-CPR-0059 Relevant Standard: EN54-17 & 18 CE Marked
Sounder Circuit Current1A
Sounder Circuit EOL²10kΩ ±5% ¼W
Sounders SupportedProtec 3000 series
Weight120g
Zone Circuit EOL²Resistive – 8.2Ω ±5% ¼W Capacitive – 100µF ±20% in series with 22Ω ±5% ¼W

Documents & Technical Downloads