301IRF Refrigerant Gas Detector
Gas Detectors

301IRF Refrigerant Gas Detector

Gamewell·SKU: GWF-F-534629

Protect chillers and mechanical rooms with the 301IRF Refrigerant Gas Detector, featuring advanced infrared sensing, early leak detection, and dependable monitoring of refrigerant gases.

Request a quote

Description

Install Honeywell 301IRF sensor at low levels in chiller room for reliable detection of a variety of refrigerant gasses. Requires installation with a 301EM-20 controller.
Product Overview:
Discreet design and rugged ABS-Polycarbonate housing for the 301IRFS set the standard for “at the source” gas detection in a chiller room. Mount directly to the chiller pad or low on the wall in close proximity to achieve early notifications in the event of a refrigerant leak.
ASHRAE No 15-2001 Mechanical Standard and B-52 Code Compliance. The ASHRAE and B-52 security standards have been established to minimize risk and protect the safety of mechanical room personnel and the environment at large. Honeywell’s 301IRF, together with the 301EM mechanical room controller, provides a complete solution that meets and even exceeds these rigorous standards. The 301EM can be configured to offer automatic fan, horn and strobe activation in addition to manual fan activation when the 301IRF detects a refrigerant.
Additional Features and Benefits:
User Friendly:
  • State-of-the-art infrared sensor technology
  • LED indicator
  • Low-profile and rugged construction for low mounting in chiller/mechanical room
Economical Solution:
  • Cost-effective answer for installation in areas where refrigeration gas hazards may be present
Detectable Gasses:
  • R11, R22, R123, R125, R134A, R404A, R407C, R410A, R448A, R449A, R507A, R513A, R514A, R4310, 1233ZD, 1234ZE.
Features & Benefits:
  • Infrared sensing technology responds promptly
  • Low-profile design suited for mounting directly to chiller pad or low on nearby wall
  • Low maintenance
Quick Specs:
  • Power requirement operates on 12 VDC power only
  • Dimensions 4” H x 11” W x 2.5” D (10.2 x 28 x 6.3 m)
  • Weight 2.33 lbs (0.603 kg)

Official manufacturer product information

Additional manufacturer specifications

  • Warnings & Restrictions: Black Engraved Letters on White Bond; Signs Should be 12 to 16 in (30 to 40 cm) Square; They must Designate and Identify the Meaning of All System Status from Visual and Audible Alarm Devices; They should be Located Close to Every Warning Device

Technical Specifications

Accuracy± 40 ppm @500 ppm
Alarm IncludedYes
Alarm TypeAudible and Visual
Batteries IncludedNo
Batteries RequiredNo
BrandHoneywell
Display IncludedNo
Features & BenefitsInfrared Sensing Technology Responds Promptly; Low Maintenance; Low-Profile Design Suited for Mounting Directly to Chiller Pad or Low on Nearby Wall
For Use With301EM-20
Humidity Range0 to 95% RH (Non-Condensing)
IndustryEnergy
MaterialABS Polycarbonate
Maximum Analog Input Supply Current2 A
Maximum Analog Input Supply Voltage12
Measuring Principle3-Electrode Electrochemical
Minimum Temperature0°C
MountingRack; Wall
Number of Analog Outputs1
Number of Relay Outputs4
Operating Life5
Overall Depth2.5 in
Overall Height4 in
Overall Width11 in
Relay IncludedYes
Sampling Pump IncludedNo
Sensing MethodInfrared
Sensor Range0 to 1000 ppm
Sensors Included1
Sub-CategoryGas Detection Sensors & Transmitters
Visual IndicatorsFailure Indication: LED will Remain ON; Normal Operation: LED Blinks According to the Sensor Addresses on the 301EM-20; Normal Operation: LED Blinks According to the Sensor Addresses on the 301EM-20
Warm Up Time15 min
Weight range2.33 lbs