
Proreact Programmable Linear Heat Detection
Programmable linear heat detection with separate pre-alarm and alarm settings, ambient temperature compensation and rate-of-rise detection. Supports up to 500 m of sensor cable per control unit.
Request a quoteDescription
Programmable linear heat detection with separate pre-alarm and alarm settings, ambient temperature compensation and rate-of-rise detection. Supports up to 500 m of sensor cable per control unit.
Manufacturer features
- Programmable Pre-Alarm and Alarm
- Set a pre-alarm temperature for early investigation and a higher alarm point for confirmed threats, allowing for a managed response
- Rate-of-Rise Detection
- The system triggers an alarm if a rapid temperature increase is detected, providing an early warning for fast-developing fires
- Up to 500m of Detection Per Unit
- A single control unit can monitor up to 500 metres of LHD cable, offering cost-effective coverage for large or long areas
- Automatic Temperature Compensation
- The system intelligently adjusts to ambient temperature changes, maintaining the accuracy of the alarm activation point and preventing false alarms
This listing covers a manufacturer product family. Select the exact ordering code and approval from the variants below. The FFE-F reference is a catalogue identifier, not a manufacturer part number.
Models and ordering information
- Nylon: F3051; Stainless Steel: F3052; Activation Temperature: 54°C (129°F) to 100°C (212°F); Approvals: UL, EN54, CNBOP, EN54, RoHS
Related accessories and compatibility
- Part No.: A1389; Description: Control Unit; Compatibility: Programmable Activation Temperature
- Part No.: A1470; Description: End of Line Unit; Compatibility: Programmable Activation Temperature
- Part No.: A1471; Description: Junction Box; Compatibility: Programmable Activation Temperature
- Part No.: A1149-100; Description: Ceiling / Wall J-Clip [SS]; Compatibility: Generic
- Part No.: A1362-100; Description: Surface P-Clip [Al]; Compatibility: Generic
- Part No.: A1329-100; Description: Surface P-Clip [SS]; Compatibility: Generic
- Part No.: A1174-100; Description: Cable Tray V-Clip [SS]; Compatibility: Generic
- Part No.: A1175-100; Description: Indoor / Outdoor Tiewrap; Compatibility: Generic
- Part No.: A1176-11; Description: Indoor Tiewrap (High Temp); Compatibility: Generic
- Part No.: A1177-100; Description: Indoor / Outdoor Tiewrap (High Temp); Compatibility: Generic
- Part No.: C1283-100; Description: Silicone Sleeves; Compatibility: Generic
Technical Specifications
| Activation temperature range | 54–100°C; available settings depend on approval |
|---|---|
| Brand | FFE |
| Cable F3051 material / diameter | Nylon / 6.0 mm |
| Cable F3052 material / diameter | Stainless steel over PVC / 5.3 mm |
| Controller | A1389 |
| Controller communication | 2-wire RS-485; Modbus RTU or ASCII |
| Controller dimensions, H × W × D | 180 × 182 × 90 mm |
| Controller enclosure rating | IP65; IK08 |
| Controller maximum power | 2 W |
| Controller operating temperature | -20°C to +50°C |
| Controller voltage | EN54: 20–30 Vdc; UL: 23–30 Vdc |
| Controller weight | 0.86 kg |
| Maximum cable zone length | 500 m |
| Maximum recoverable cable temperature | 125°C; replace if exceeded |
| Minimum bend radius | F3051: 100 mm; F3052: 75 mm |
| Minimum cable ambient temperature | -40°C |
| Remote reset | 5–28 Vdc for at least 3 seconds |
Documents & Technical Downloads
Proreact Pocket Guide (EN)
Pocket Guide
Proreact Product Brochure (EN)
Brochure
Proreact Accessories Guide (EN)
Accessories
Related component: Proreact Leader Cable Datasheet (EN)
Datasheet
Related component: Proreact PAT Composite Control Unit Datasheet (EN)
Datasheet
Related component: Proreact PAT End-of-Line-Unit Datasheet (EN)
Datasheet
Related component: Proreact PAT Junction Box Datasheet (EN)
Datasheet
Proreact PAT LHD Sensor Cable Datasheet (EN)
Datasheet
Proreact PAT LHD Cable User Guide (EN)
User Guide
Proreact UL Certificate
Approvals
Proreact CNBOP Certificate
Approvals
Proreact VdS Certificate
Approvals

