
Sensis Cobalt HM1 / HM2 Aspirating Smoke Detectors
Single- or dual-zone aspirating smoke detectors combining smoke, temperature and humidity monitoring, configurable relays and RS-485 networking.
Request a quoteDescription
Single- or dual-zone aspirating smoke detectors combining smoke, temperature and humidity monitoring, configurable relays and RS-485 networking.
Manufacturer features
- Sub-Zone Specific Configuration
- HM1 (single pipe), Designed for precise protection of individual areas while the HM2 (dual pipe) enables coverage of two separate sub-zones in a single unit - cost-effective flexibility for varied applications
- Aspirating Detection with High Sensitivity
- Built on CSD-H aspirator technology, Cobalt delivers highly sensitive early warning smoke detection, with a wide sensitivity range for dependable performance
- Compact, Purpose-Built Design
- Engineered specifically for small to medium open spaces, Cobalt units combine sampling pipes, aspirators, and detection chamber into a single, space-efficient enclosure
- Network Integration & Output Options
- Equipped with RS‑485 communication and Modbus RTU support, along with relay outputs, facilitating seamless integration into fire panels and building management systems
This listing covers a manufacturer product family. Select the exact ordering code and approval from the variants below. The FFE-F reference is a catalogue identifier, not a manufacturer part number.
Models and ordering information
- Part No.: 4100-100; Description: Sensis Cobalt HM1; Approval: EN
- Part No.: 4200-100; Description: Sensis Cobalt HM2; Approval: EN
The datasheet operating-conditions table specifies a device ambient temperature of 0–40°C. Its separate sensor warning mentions a 60°C ceiling; the 0–100°C sensing range is not a device operating rating.
Related accessories and compatibility
- Part No.: 4800-000; Description: Sensis Network Interface Module (NIM-1200); Compatibility: All Sensis Detectors
- Part No.: 4800-001; Description: Sensis Network Control Panel (NCP-1215); Compatibility: All Sensis Detectors
- Part No.: 4800-002; Description: Sensis In-Line Filter 25mm; Compatibility: All Sensis Detectors
- Part No.: 4800-003; Description: RS485 to USB Converter; Compatibility: All Sensis Detectors
- Part No.: 4800-005; Description: Sensis 2.4A Power Supply Unit; Compatibility: All Sensis Detectors. Additional battery box may be required for 2000s models
Technical Specifications
| Alarm levels | Alert, Action, Fire-1, Fire-2; each delay 0–60 seconds |
|---|---|
| Alarm sensitivity | 0.01–20% obs/m |
| Brand | FFE |
| Communication | RS-485; Modbus RTU |
| Current | HM1: 115–157 mA; HM2: 230–314 mA |
| Device operating temperature | 0°C to +40°C |
| Dimensions, H × W × D | 321.7 × 154 × 97.4 mm |
| Event log | 180,000 events |
| General purpose inputs | HM1: 1; HM2: 2 |
| Humidity sensing range | 0–100% RH |
| IP rating | IP51 |
| Maximum coverage | HM1: 1,600 m²; HM2: 2,000 m²; subject to approved pipe design |
| Network devices | Up to 250 |
| Operating humidity | 10–95% RH, non-condensing |
| Pipe length, linear / branched | HM1: 105 / 260 m; HM2: 2 × 105 / 2 × 260 m |
| Relay outputs | HM1: 2; HM2: 4; configurable, 2 A at 30 Vdc |
| Sampling air temperature | -20°C to +60°C |
| Smoke detection range | 0.02–25% obs/m |
| Supply voltage | 24 ±4.8 Vdc |
| Temperature sensing range | 0–100°C; distinct from device operating temperature |
| Weight | HM1: 2.2 kg; HM2: 2.3 kg |
Documents & Technical Downloads
Sensis Cobalt HM Datasheet (EN)
Datasheet
Sensis Cobalt HM User Guide (EN)
User Guide
Sensis Cobalt HM CPR Certificate (EN)
Approvals
Sensis Cobalt HM EU Declaration of Conformity (DoC) (EN)
Approvals
Sensis Cobalt HM EU Declaration of Performance (DoP) (EN)
Approvals
Sensis Pocket Guide (EN)
Pocket Guide
Sensis Cobalt HM Datasheet (ES)
Datasheet
Sensis Cobalt HM Datasheet (IT)
Datasheet
Sensis Cobalt HM Datasheet (PT)
Datasheet



