DS Dialer
Communication Gateways

DS Dialer

Notifier·SKU: P2407002

The Honeywell® solution for connecting a NOTIFIER Onyx, INSPIRE, or Gamewell-FCIE3,S3 fire alarm system to central station viathe public switched telephone network.

Request a quote

Description

The DS Dialer provides dual telephone line communication between a standalone FACP

or network of FACPs to a central receiving station to report system status. The DS Dialer

mounts in a red enclosure external to a fire panel It uses modular jacks to interface the

primary and secondary phone lines to the public switched telephone network.

The DS Dialer consists of a main circuit board and telephone (POTS) card enclosed

in a red box.

Features & Benefits:
  • COMPATIBLE PANELS
  • NOTIFIER INSPIRE PANELS: N16E, N16X
  • NOTIFIER ONYX PANELS: NFS-320, NFS-640, NFS2-640, NFS-3030, NFS2-3030
  • GAMEWELL-FCI E3 SERIES PANEL: ILI-MB-E3, ILI95-MB-E3
  • GAMEWELL-FCI S3 SERIES PANELS: SLP-E3
  • COMPATIBLE RECEIVERS
  • Ademco™ 685 (with 685-8 Line card with Rev. 4.4d software)
  • Ademco MX8000 (with 124060V206B and 124063 Line Card Rev. B)
  • Silent Knight® 9500 (with version V2.4 receiver and 126047 Line Card Rev. G)
  • Silent Knight 9800 (with 124077V2.00 receiver and 126047 Line Card Rev. M)
  • Honeywell® FBI CP220FB (with software version 3.9)
  • Osborne Hoffman 2000E® (with receiver software version 7301)
  • Radionics 6600 (with 01.01.03 receiver software and 01.01.03 line card)
  • SurGard MLR2 (with software version 1.86)
  • SurGard System III (with software 1.72)
  • SurGard MLR-2000 (with DSP4016 and version 1.6 Line Card)
  • COMMUNICATION FORMATS
  • Ademco Contact ID
  • FEATURES AND BENEFITS
  • Collects system data from the connected FACP and sends it to the central receiving station
  • Serves as a fire alarm communicator to the central station
  • Provides dual telephone lines (primary and backup) to ensure communication
  • Provides dual telephone line voltage detection
  • Employs Ademco® Contact ID protocols
  • Recognizes dial tones (350 and 440 hertz typical in most networks)
  • Automatically dials programmed central station phone numbers
  • Automatic line seizure takes control and disconnects any local premises phones on the same line
  • Generate Central Station reports using CLSS Site Manager
  • LED status indicators for Lost Panel Connection, and Central Station Handshake Signal, and Communication
  • Failure
  • Communicates vital system status including:- Independent zone/point alarm, trouble and supervisory- Security, panel off-normal, NAC trouble- AC (main) power loss (2-hour report delay)
Certifications:
  • AGENCY LISTINGS & APPROVALS
  • The listings and approvals below apply to the HON-DACT-DS.
  • In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Contact Honeywell for the latest listings.
  • ETL: Control Number - 5025335, Conforms to UL STD 864
  • STANDARDS & CODES
  • FCC ID: DS Dialer - 1W6AL02ACGWMB
  • National Fire Protection Association:- NFPA 70- NFPA 72

Official manufacturer product information

Technical Specifications

BrandNOTIFIER
Communicates vital system status including- Independent zone/point alarm, trouble and supervisory- Security, panel off-normal, NAC trouble- AC (main) power loss (2-hour report delay)
ETLControl Number - 5025335, Conforms to UL STD 864 STANDARDS & CODES FCC ID: DS Dialer - 1W6AL02ACGWMB National Fire Protection Association:- NFPA 70- NFPA 72
Failure Communicates vital system status including- Independent zone/point alarm, trouble and supervisory- Security, panel off-normal, NAC trouble- AC (main) power loss (2-hour report delay)
FCC IDDS Dialer - 1W6AL02ACGWMB National Fire Protection Association:- NFPA 70- NFPA 72
National Fire Protection Association- NFPA 70- NFPA 72