Context Plus Red flashing light
Visual Alarm Devices (Strobes)

Context Plus Red flashing light

Context Plus·SKU: 2251

230 Volts red flashing light IP65. Require Relay base EI128R or Ei128RBU or Ei428 to switch it.

Request a quote

Description

SAB300

Manufacturer model details

The SAB300 is a compact clear strobe with a modern sleek appearance powered by 230V AC.

The strobe is fitted with a diffuser for greater visibility and spread of light.

The terminal block has a L-live and N-neutral connection only.  For the strobe to flash when a fire or CO event is detected, it needs to be connected to the NO contact of an Ei Electronics relay (eg. Ei428, Ei128R, Ei128RBU) interconnected with the Alarm system (as per below wiring schematics).

Once the terminal block of the Xenon strobe part is connected to the relay, simply fit on base by twisting it on.  It can then only be removed with a screw driver due to is vandal-resistant safety locking mechanism.

The strobe will now give a visual warning that the alarm system has been triggered.

The 27mm deep base has 2 x 4.5mm slots to screw it in place.  It is supplied with a seal and grommet.

 

Official manufacturer product information

Official manufacturer product information

Cooper Wheelock ACMAXSB

Indicative Price

from

Addressable wall sounder strobe with loop isolation; red flash, pure white body.

Addressable wall sounder strobe with loop isolation; red flash, pure white body.

Indicative Price

from

Non-isolated wall sounder strobe with red flash; pure white body.

Non-isolated wall sounder strobe with red flash; pure white body.

Indicative Price

from

SPSCWL - System Sensor (Replaced by SPSCWLED)

SPSCWL - System Sensor (Replaced by SPSCWLED)

Indicative Price

from